How to Use the NanGuang CN-A25 Remote Control for Studio Lights

Quick answer

The NanGuang CN-A25 remote control lets you adjust brightness and color on compatible NanGuang LED lights from across the room. Follow the steps below to pair, configure, and use it efficiently.

Using the NanGuang CN-A25 Remote Control

1. Insert batteries and power on: Open the battery compartment on the back of the CN-A25 and install two AAA batteries (not included). Press the power button to turn on the remote. The LED indicator should light up briefly. Common mistake: Using old or mismatched batteries can cause intermittent connection. Always use fresh batteries of the same brand.
2. Set your light to wireless mode: On your NanGuang LED light, navigate to the wireless or remote control setting (often labeled 'REMOTE' or 'WIRELESS'). Enable it so the light can accept signals from the CN-A25. Checkpoint: If the light does not have a wireless setting, it may not be compatible. Refer to the light's manual for supported remote models.
3. Pair the remote with the light: Press and hold the 'PAIR' button on the CN-A25 for about 3 seconds until the LED flashes rapidly. Then press the 'PAIR' button on your light (or follow the light's pairing procedure). The remote's LED will stop flashing and stay solid, indicating a successful connection. Common mistake: Skipping the pairing step or trying to use the remote without pairing will result in no response. Repeat the pairing process if the light does not react.
4. Select the correct mode for your light type: Press the 'MODE' button on the remote to cycle through the four modes: single color, bi-color, full spectrum, and an additional mode. Choose the mode that matches your light's capabilities. For example, use bi-color mode for lights with adjustable color temperature. Checkpoint: Using the wrong mode may cause the brightness or color controls to behave unexpectedly. If controls seem unresponsive, double-check the mode setting.
5. Adjust brightness and color: Use the 'BRIGHTNESS' dial to increase or decrease light output. If your light supports color adjustment, use the 'COLOR' dial to shift hue or color temperature. The remote sends changes in real time, so you can see the effect immediately on your light. Common mistake: Turning the dial too quickly can overshoot your desired setting. Make gradual adjustments and watch the light for feedback.
6. Test the range and troubleshoot: Walk around your studio with the remote to confirm the wireless range (typically up to 30 meters in open space). If the light stops responding, move closer or check for obstructions like metal objects or thick walls. Replace batteries if the LED indicator is dim. Checkpoint: If the remote works intermittently, try re-pairing or moving the light to a different position. Interference from other wireless devices can also affect performance.

Product facts

• NanGuang CN-A25 Remote Control: Full control from a distance - With the NanGuang CN-A25 wireless remote control, you can control hundreds of compatible NanGuang LED lights with the push of a single button. The four different modes allow you to adjust single colour, full spectrum and bi-colour lights in several ways, giving you full control over brightness and colour from a distance. This means you can adjust lighting without leaving your camera position, saving time during shoots and reducing the risk of disturbing your setup.