Back to Blog
Product Reviews 2026-11-21 Kenro 1 views

Saramonic XLR Mic Kit Setup for Interviews

Saramonic XLR Mic Kit Setup for Interviews

Learn how to set up the Saramonic XLR Shotgun Microphone Kit for clear interview audio, including phantom power requirements and compatible adapters.

What You Need for Interview Audio

Recording clear dialogue in an interview setting starts with the right microphone setup. The Saramonic XLR Shotgun Microphone Kit gives you two broadcast-quality cardioid mics in one package, making it straightforward to capture two speakers with consistent sound. Each mic uses a cardioid polar pattern to focus on the person speaking and reduce background noise.

Kit Contents and Power Requirements

  • (B-Stock) Saramonic XLR Shotgun Microphone Kit: The Saramonic SRAXM3 kit includes two XLR shotgun-style mics and two foam windshields. You get matched mics for dual-person interviews right out of the box, plus wind protection for outdoor or breezy locations.
    (B-Stock) Saramonic XLR Shotgun Microphone Kit
    (B-Stock) Saramonic XLR Shotgun Microphone Kit
  • (B-Stock) Saramonic XLR Shotgun Microphone Kit: Each microphone is powered by +48V phantom power. Your audio interface, mixer, or recorder must supply +48V phantom power. Without it, the mics will not produce audio.

Setting Up the Saramonic XLR Mic Kit

Follow these steps to get your XLR shotgun mics ready for an interview.

  1. Connect to a compatible adapter or mixer: Plug each XLR mic into a Saramonic audio adapter with XLR input, such as the MixMic, SRPAX2, SRAX107, SmartRig+, SRAX104, or BMCCA01. Alternatively, connect to any standard XLR input on a mixer or audio interface that supplies +48V phantom power.
  2. Enable phantom power: Turn on +48V phantom power on your mixer, interface, or adapter. Both mics require this to operate.
  3. Position the microphones: Place each mic from each speaker, aimed at their mouth, following the supplied product instructions for distance. The cardioid pickup pattern rejects sound from the sides and rear, helping isolate each voice.
  4. Attach the foam windshield: Slide the included foam windshield over each mic to reduce wind noise and plosive sounds during speech.

Compatibility and Limitations

The Saramonic XLR mics are designed to work with Saramonic adapters that have XLR inputs. They also work with standard XLR gear that supplies +48V phantom power. The kit does not include a mixer or recorder, so you will need to supply your own. Each mic has a 3.5mm audio output, so check that your adapter or recorder accepts that connection type.

B-Stock Considerations

This product is sold as B-Stock. It may be an ex-demo unit, may come without branded packaging, or may show minor cosmetic imperfections. Functionally, the microphones are broadcast-quality and should perform as expected. If you have questions about a specific unit, contact [email protected] for more information.

Related Articles

Customer Service
Home
Products
Cart
Profile