Takeway R1 vs R2 vs G1: Mini Clampod Comparison for Phones
By Kenro | Published: 2026-11-01
Category: Comparisons
Compare the Takeway R1, R2 and G1 on clamping range, phone support and mounting options to pick the right small support for travel, handlebars or video calls.
Quick answer
Choose the Takeway R2 Mini Clampod with PH03 Phone Holder if you want a clamp plus a secure phone holder and 360-degree ball head for travel or action filming. Pick the Takeway R1 Mini Clampod for a lower-cost clamp with a quick-release plate when you already have your own phone mount, or the Takeway G1 Mini Tripod when you need a small tabletop stand rather than a clamp.
Clamping range and what it means in practice
The R1 clamps onto anything 5–32mm thick, while the R2 clamps onto anything up to 32mm thick. The R1's stated minimum of 5mm matters if you want to grip a thin bar or rail; the R2's catalog entry does not state a minimum, so treat very thin surfaces as an unknown rather than a guaranteed fit. Both share the same 32mm upper limit, which covers most handlebars, poles and rails you are likely to encounter.
Phone mounting: included holder versus quick-release plate
The R2 comes with a secure smartphone holder and a 360-degree rotating ball head, so you can position a phone in portrait or landscape without adding parts. The R1 uses a quick-release plate for action cameras or other devices, but the catalog does not list a phone holder in the box. If phone shooting is the main job, the R2 removes a separate purchase and a compatibility question; if you already own a phone clamp or action-cam mount, the R1's plate system may be enough.
Clampod versus mini tripod: different jobs
A clampod grips a bar, pole or rail and holds a device out from that surface, which suits handlebars, travel and unusual mounting points. The G1 Mini Tripod is a tabletop device with a 1/4-inch screw thread and a 3kg load capacity, so it stands on a flat surface rather than clamping. The G1 is also designed to work with the Takeway T-B01 Ball head and T1 Clampod, which gives it a second life as part of a modular setup. Neither approach replaces the other: choose based on whether you have something to clamp onto or a surface to stand on.
Trade-offs that decide the choice
- R2: convenience versus cost: The R2 includes a phone holder and ball head, so it is the simpler phone-first choice. The trade-off is that you pay more than for the R1, and the catalog does not state a minimum clamping thickness, so check thin rails before relying on it. If phone shooting is the main use, budget for the R2 rather than adding a holder to the R1.
- R1: lower cost versus extra parts: The R1 costs less and its 5–32mm range covers thin bars, but it ships with a quick-release plate rather than a phone holder. You will need a compatible phone mount or action-cam adapter to use a phone. Only choose the R1 for phone work if you already own a suitable mount.
- G1: stability versus surface dependence: The G1 stands on a table and holds up to 3kg via a 1/4-inch thread, which is ideal for video calls or desk work. It cannot clamp to a handlebar or pole, so it does not replace a clampod for travel and action use. Pick the G1 for desk and tabletop shooting, not for clamping.
Product facts at a glance
- Takeway R2 Mini Clampod with PH03 Phone Holder: Supplied with a secure smartphone holder and a 360-degree rotating ball head, and clamps onto anything up to 32mm thick. You can mount a phone straight out of the box and rotate it between portrait and landscape without buying a separate holder.
Takeway R2 Mini Clampod with PH03 Phone Holder - Takeway R1 Mini Clampod: Clamps onto anything 5–32mm thick and uses a quick-release plate for action cameras or other devices. It is the more flexible clamp for thin bars, but you need to supply your own phone mount if phone shooting is the goal.
Takeway R1 Mini Clampod - Takeway G1 Mini Tripod: Tabletop tripod with a 1/4-inch screw thread and a 3kg load capacity, designed to work with the Takeway T-B01 Ball head and T1 Clampod. It gives you a stable stand for flat surfaces and can be combined with other Takeway parts rather than clamping.
Which Takeway support fits your shooting?
Best for
- Travelers and action shooters who want a clamp and phone holder in one package (R2)
- Cyclists or motorcyclists who already own a phone or action-cam mount and want a lower-cost clamp (R1)
- Desk and tabletop use such as video calls, with a 3kg load capacity and 1/4-inch thread (G1)
Not for
- Anyone who needs a phone holder included and is considering the R1 without checking their own mount
- Clamping to handlebars or poles, which the G1 cannot do
- Very thin rails under 5mm if you choose the R2, since its minimum thickness is not stated
