(B-Stock) Nissin Di600 Flashgun - Nikon Fit

Please note this product is B-Stock and may either be ex-demo, without branded packaging or may show minor aesthetic imperfections. For more information on our B-Stock, please contact [email protected].

The new Nissin Di600 offers Wireless TTL Remote capabilities along with plenty of power. The Nissin Di600 has been developed based on the very successful and widely acclaimed Nissin Di622 MkII, and incorporates the Di622 MkII features into a powerful and cost-effective flash gun.

Key Features: 

• Flash output of GN44 at 105mm (ISO100).
• Zoom range auto adjusts from 24mm105mm, flash comes with a built-in diffuser that gives a 16mm lens coverage.
• The flash head tilts up to 90°, and rotates horizontally 90° to left and 180° to right.
• Manual or a slave mode. Light output on the Di600 is fully adjustable down to 1/32 in manual and slave modes. In TTL mode, the flash output is controlled by the camera.
• Flash compensation can be controlled on the back of the flash in ½ EV increments.
• Flash recycles in about 5 seconds when using 1/1 full power output.
• Nissin Original “MY TTL” Setting - The TTL flash power level is pre-set for exposure at the factory, however you can reset the power to the desired exposure level in +/- 0.75 Ev. by 0.25 Ev increments. The pre-set value is memorized as your personal standard after switching the unit off. The normal TTL calculations are now based off of this customized setting.
• Wireless Remote Flash that allows it to be used as slave unit. The 3 slave modes available are described below: o Slave Digital (SD): Nissin Di600 synchronizes to the pre-flash system. The master flash is to be set at TTL (E-TTL II / E-TTL for Canon, i-TTL for Nikon and ADI/ PTTL for Sony) mode. o Slave Film (SF): Nissin Di600 synchronizes to the traditional single flash system. The master flash is to be set to manual mode. Studio lighting system can be synchronized to this mode. o Wireless TTL: Nissin Di600 synchronizes to the wireless remote flash system with the use of a master controller. Make adjustments to the Di600 by way of Channel 1 group A on your master.
• External Synchro Contact - The Nissin Di600 can be used off camera using the Sync Contact. Using the standard 3.5mm and a PC sync terminal the flash can be hard wired to the camera.